Thinkware F70 - 1080P Full HD Front Only Dashcam, Parking Mode, G-Sensor, 8GB SD Card

The F70 dash cam from Thinkware brings you clear & crisp 1080p full HD footage in a sleek design at an affordable price. The perfect camera for anyone looking for a first dash cam, with an industry-leading 2-year warranty.

Featuring Parking Mode, using G-Sensor and motion detection to protect your vehicle when hardwired. Plus the dashcam’s Format Free Technology protects your SD card from corruption.

Specification:

• Resolution: Front – Full HD (1920 x 1080)
• Camera: Front – 2.1MP CMOS
• Frame Rate: 30 fps
• Viewing Angle: 140° (Diagonal)
• Dimensions(WxDxH): 78 x 34.6 x 31.5 mm (3.07 x 1.4 X 1.24 inch)
• Weight: 42.4g (0.096 lb)
• Storage Temperature: -20°~ 70°C (-4°~ 158°F)
• Operating Temperature: -10°~ 60°C (14°~ 140°F)
• Capacity: MicroSD card 8/16/32/64 GB (UHS-I)
• Input Power: DC 12/24V, Built-in Super Capacitor

What's In The Box:

• F70 Dash Cam
• Hardwiring Cable
• 8GB MicroSD Card
• Windshield Mount
• Spare 3M Mounting Tape
• Adhesive Cable Clips
• Quick Start Guide

High Definition Video Quality

CMOS Image Sensors allow crisp clean Full 1080p HD footage recording during both day and night at 30FPS. Capture more detail in all road conditions including number plates of other drivers.

The 140° wide angle lens view will minimize blind spots to assure recording of all events without fail.

Parking Surveillance Mode

Parking mode is a feature of dash cams that are either hardwired or using the OBD2 Connector. This allows them to continue recording while your car is parked and turned off. All Thinkware dashcams continuously monitor the health of the vehicle’s battery and will shut down if it detects any issues.

Please note: A hardwire or OBDII cable installation is required for Parking Mode functionality

Motion Detection

Monitor and capture any motion around the vehicle for potential vandalism attempts.

Impact Detection

Monitor any impact to the vehicle while it is parked to catch any hit-and-run driver in the act while you are away.

Energy Saving Mode

Reduce power consumption and provides longer video recording than normal parking mode. When you are away from your car for an extended period of time, energy saving parking recording is a recommended solution. When in use, the device will go to sleep and after an impact has been detected by the built-in G-sensor, it will wake up within a second and start recording for the next 20 seconds.

CONTINUOUS RECORDING MODE

This mode is activated automatically when you start the engine. Recorded videos are saved in one-minute segments with an auto-looping mechanism.

INCIDENT RECORDING MODE

The Active Impact Monitoring System will automatically store the video data ten seconds prior to and after a collision registered by the 3-axis G-Sensor.

MANUAL RECORDING MODE

Similar to a video camera, you can use the Manual Recording Mode to capture events that occur in front of your vehicle whether or not it is in motion.

FAIL-SAFE RECORDING

In the event that the power gets disconnected after an accident, the fail-safe recording uses the Super Capacitor for backup power to ensure safe storage of any recording in progress.

Front Vehicle Departure Warning (FVDW)

Informs the driver of the vehicle ahead starting to move.

Wide Dynamic Range

Avoid overexposure in your Dash Cam footage when experiencing sources of bright light whilst driving, keeping your footage clearer.

Wide Dynamic Range (WDR) is technology that allows the dashboard camera to capture a clearer image in a strongly contrasted environment. It can solve problems such as intense contrasts of light sources. In the event of a sudden change in frontal light exposure, such as when driving into or out of a tunnel or driving directly into bright sunshine, the Wide Dynamic Range function will eliminate excessively bright spots on the recordings.

Night-Time Quality Correction

Most videos recorded on a dashcam in the dark are generally difficult to make out details. That is why this dashcam uses enhanced sensors that come with a standard function of brightness and colour control as well as noise cancellation. These increase the quality of the image and ensure your videos are always the best quality possible.