JL Audio Slash 300/4v3 4 Channel Class A/B Amplifier

In stock
SKU: JL300/4-V3
Regular price £699.99

4-Channel Class A/B Full-Range Amplifier, 75 W x 4 @ 1.5-4 Ω

If you prefer a traditional Class A/B design taken to its highest possible level, the 300/4v3 is your amplifier, thanks to its outstanding fidelity, reliability and well-designed feature set.

This classic amplifier features JL Audio's unique, and patented, Absolute Symmetry Class A/B circuit and our R.I.P.S. power supply design for full power delivery (75 W x 4) over a wide range of load impedances and vehicle voltages.

This amplifier features an all-black look that is pure, sexy evil, including the powder-coated cast alloy heat sink and end caps.

If you prefer a traditional Class A/B design taken to its highest possible level, the JL Audio 300/4v3 is your amplifier, thanks to its outstanding fidelity, reliability and well-designed feature set.

This classic amplifier features JL Audio's unique, and patented, Absolute Symmetry Class A/B circuit and our R.I.P.S. power supply design for full power delivery (75 W x 4 RMS) over a wide range of load impedances and vehicle voltages.

This amplifier features an all-black look that is pure, sexy evil, including the powder-coated cast alloy heat sink and end caps.

*Please note this is a sepcial order item. Please contact us if you wish to order. Thank You

Rated Continuous RMS Power @ 14.4 V

  • @ 4 Ω - 75 W RMS x 4
  • @ 3 Ω - 75 W RMS x 4
  • @ 2 Ω - 75 W RMS x 4
  • @1.5 Ω - 75 W RMS x 4
  • Bridged @ 8 Ω - 150 W RMS x 2
  • Brdiged @ 4 Ω - 150 W RMS x 2

Rated Continuous RMS Power @ 12.5 V

  • @ 4 Ω - 75 W RMS x 4
  • @ 3 Ω - 75 W RMS x 4
  • @ 2 Ω - 75 W RMS x 4
  • @1.5 Ω - 75 W RMS x 4
  • Bridged @ 8 Ω - 150 W RMS x 2
  • Brdiged @ 4 Ω - 150 W RMS x 2

General Specifications

  • Frequency Response - 5 Hz - 30 kHz (+0, -1dB)
  • S/N Ratio, referred to highest rated power - >108.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • S/N Ratio, referred to 1 W - >89.5 dB (A-weighted, 20 Hz - 20 kHz noise bandwidth)
  • Damping Factor @ 4 Ω - >300 / 50 Hz
  • THD+N @ Rated Power - <0.03% @ 4 Ω per Ch.
  • Input Voltage Range @ RCA Inputs - Switchable from 200 mV - 2 V RMS (Low) to 800 mV - 8 V RMS (High)
  • Min Copper Power / Ground Wire Gauge - 4 AWG wire
  • Fuse Rating - 40 A (AFS, AGU or MaxiFuse™)
Signal Processing

  • Filter Modes - Low-Pass or High-Pass
  • Filter Slope (dB/Octave) - 12dB or 24 dB
  • Filter Frequency Range - 50-5 kHz
  • Detented, Calibrated Filter Freq. Potentiometers - Yes
  • Filter Defeatable? - Yes
  • Remote Level Control - No
  • Remote Level Modes - N/A
  • Channel Input Mode Switch - Yes (2/4 ch.)
  • Pass-Through Preamp Output Type - None
  • Source Channel Selection for PreOuts - N/A
Physical Specificaitons

Table_Image

  • Height (H) - 2.36 in / 60 mm
  • Width (W) - 13.40 in / 340 mm
  • Depth (D) - 9.25 in / 235 mm

UK Delivery Options:
  • Standard Delivery 2-3 Working Days £4.99
  • Courier Next Working Day £9.99
  • Courier Saturday £25

International Delivery Options:

Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk

Order Tracking:

Visit the DPD website Tracking page here - You will need your tracking number

Unwanted Goods:

In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.

Manufacturer's warranty:

Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.

For more information Click Here