Rockford Fosgate Punch P600X4 - 4 Channel Amplifier
Need Help?
The Punch P600X4 multi-channel amplifier is versatile to power any audio system configuration. In addition to 4-channel stereo mode, you can bridge both channels to create a high power 2-channel amp, or run stereo speakers on the front with subwoofers on the rear in 3-channel mode. The variable HP/LP crossover and built-in Punch EQ allows for precise tuning of Bass frequencies and the Pass-Thru RCA jacks provide flexibility as your system grows and keeping Y-adapters to a minimum.
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- 12dB/octave Butterworth crossover
- On-board Punch EQ with +18dB boost @ 45Hz.
- Muted turn on
- Stealth top mounted control panel
- Cast aluminium heatsink
- Short circuit protection
- Over current protection
Specification:
- Number of Channels:4
- Rated Power (RMS Continuous Power):
- 75 Watts x 4 @ 4-Ohm
- 150 Watts x 4 @ 2-Ohm
- 300 Watts x 2 @ 4-Ohm Bridged
- Total Power (Sum of Rated Power): 600 Watts RMS
- Dynamic Power (PVC/PowerCube® Measurement):
- 129 Watts x 4 @ 4-Ohms 0° Res
- 211 Watts x 4 @ 2-Ohms 0° Res
- Bridgeable: Yes
- Efficiency (average): 68% @ 4-Ohm
- Crossover Controls:
- Front/Rear High-Pass (HP): 50Hz-250Hz @ 12dB/octave Butterworth
- RFront/Rear Low-Pass (HP): 50Hz-250Hz 12dB/octave Butterworth
- All-Pass: Yes
- Tone Controls:
- Front Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Front Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Rear Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Rear Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Function depends upon LP/AP/HP switch position
- Signal Input: Hi/Low level: 2 RCA pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminium
- Cooling: Convection
- Remote Controls:Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED
- Input Clip LED
- Output Clip LED
- Circuit Topology Class: Class-A/B
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Dimensions (HxWxL): 2.38 x 7.76 x 13.28 (in) / 6.05 x 19.71 x 33.73 (cm)
UK Delivery Options:
- Standard Delivery 2-3 Working Days £4.99
- Courier Next Working Day £9.99
- Courier Saturday £25
International Delivery Options:
Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk
Order Tracking:
Visit the DPD website Tracking page here - You will need your tracking number
Unwanted Goods:
In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.
Manufacturer's warranty:
Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.
For more information Click Here