Rockford Fosgate Punch 10" Sub & Amp Package P1-1X10 & P300X1
Need Help?
The components of this Rockford Fosgate system package have been specially chosen to work well together, offering superb bass depth and value for money.
This kit comprises of:
- 1 x Rockford Fosgate Punch P300X1 Mono Amplifier
- 1 x Rockford Fosgate Punch P1-1X10 10" Sub & enclosure
- 1 x 8AWG Wiring Kit
Amp Specifications
- Number of Channels: 1
- Rated Power(RMS Continuous Power):
- 200 Watts x 1 @ 4-Ohm
- 300 Watts x 1 @ 2-Ohm
- Total Power (Sum of Rated Power): 300 Watts
- Dynamic Power (PVC/PowerCube® Measurement):
- 260 Watts x 1 @ 4-Ohms 0° Res
- 444 Watts x 1 @ 2-Ohms 0° Res
- Frequency Response: 20Hz to 20kHz +/- 1.0dB
- Efficiency (average): 74% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise):
- 4-Ohm: <1.0%
- 2-Ohm: <1.0%
- Crossover Controls: High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
- Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
- All-Pass: Yes
- Tone Controls: Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
- Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
- Function depends upon LP/AP/HP switch position
- Input Sensitivity: 150 mV - 12 V
- Signal Input: Hi/Low level: 1 RCA pair
- Signal Output: Low Level: 1 RCA Pair
- Power Input Connector: Captive C-Clamp
- Power Wire Gauge: 8 AWG to 4 AWG
- Speaker Output Connector: Captive C-Clamp
- Speaker Wire Gauge: 8 AWG to 18 AWG
- Heat Sink Type: Cast aluminium
- Cooling: Convection
- Remote Controls: Optional Punch Level Control (PLC2) Ready
- Visual Indicators: Power/Protect/Thermal LED
- Input Clip LED
- Output Clip LED
- Circuit Topology Class: Class-A/B
- Operating Voltage: 9 - 16 VDC
- Recommended Fuse (not included): 50 A
- Max. Current Draw (13.8V Sinewave): 45 A
- Average Current Draw (13.8V Music): 23 A
- Suggested Alternator: 75 A
- Shipping Weight: 9.5 Lbs. (4.30 Kg.)
- Dimensions (HxWxL): 2.38 x 7.76 x 9.86 (in) / 6.05 x 19.71 x 25.04 (cm)
Sub Specifications
- Woofer Size: 10"
- Woofer Series: Punch P1 (P1S4-10)
- Nominal Impedance (ea): 4-Ohm
- Internally wired to create a 4-Ohm amplifier load
- Power Handling: 250 Watts RMS / 500 Watts Max
- System Configuration: Vented
- Enclosure Material: 5/8" MDF (Medium Density Fiberboard)
- Speaker Connector: Up to 10 AWG compression terminals
- Shipping Weight: 36 Lbs. (16.32 kg)
- Dimensions: 13.125" x 17" x 15.125" (33.3cm x 43.2cm x 38.4cm)
8 Gauge Amplifier Installtion Kit with High Performance RCA Interconnect and Speaker Wire
- 30 Ft of Speaker Wire
- 20 ft. 8 GA Red Power Cable, 16 ft. 18 GA Blue Turn-On Wire, 3 ft. 8 GA Black Ground Cable
- Competition Quality Fuse Holder with AGU Fuse Plus #10, 5/16" and 1/4" Ring Terminals
- 6 ft. Split Loom Tubing, (3) Rubber Grommets and (20) 4" Wire Ties
UK Delivery Options:
- Standard Delivery 2-3 Working Days £4.99
- Courier Next Working Day £9.99
- Courier Saturday £25
International Delivery Options:
Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk
Order Tracking:
Visit the DPD website Tracking page here - You will need your tracking number
Unwanted Goods:
In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.
Manufacturer's warranty:
Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.
For more information Click Here