Rockford Fosgate PM300X2 Punch Marine 300-Watt Class-ab 2-Channel Amplifier
Need Help?
The PM300X2 is a solid choice if you're looking to drive a pair of coaxial speakers, component speakers, or a single subwoofer. The amplifier can also be run in stereo/mono mode simultaneously when using passive crossovers (not supplied) on all speakers. With proven PUNCH technology, the PM300X2 delivers real Rockford Fosgate power from a small design and is flexible to accommodate any moderately sized system.
Features
- High level input capable with Auto Turn-On circuit
- RCA pass-thru outputs
- Features C.L.E.A.N. Set-up
- 12dB/octave Butterworth crossover
- Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
- On-board Punch EQ with +18dB boost @ 45Hz
- Muted turn on
- Stealth top mounted control panel
- Cast aluminium heatsink
- Short circuit protection
- Over current protection
- Marine grade two part epoxy coating on circuit boards
- Marine grade stainless steel hardware
Specification
- Number of Channels 2
- Total Power (Sum of Rated Power) 300 Watts
- Rated Power (RMS Continuous Power)
- 100 Watts x 2 @ 4-Ohm
- 150 Watts x 2 @ 2-Ohm
- 300 Watts x 1 @ 4-Ohm Bridged
- Dynamic Power (PVC/PowerCube®)
- 120 Watts x 2 @ 4-Ohms 0° Res
- 203 Watts x 2 @ 2-Ohms 0° Res
- Bridgeable
- Frequency Response 20Hz-20kHz
- Input Sensitivity 150 mV - 12 V
- Circuit Topology Class A/B
- Efficiency (average) 69% @ 4-Ohm
- Total Harmonic Distortion (THD+Noise)
- 4-Ohm: <1.0%
- 2-Ohm: <1.0%
- Signal Input Hi/Low Level: 1 RCA Pair
- Signal Output Low Level: 1 RCA Pair
- Tone Controls
- 0dB to +14dB @ 12.5kHz
- 0dB to +18dB @ 45Hz
- Crossover Controls
- High-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
- Low-Pass: 50Hz - 250Hz @ 12dB/Octave Butterworth
- All-Pass: Yes
- Remote Controls Optional Punch Level Control (PLC2) Ready
- Visual Indicators
- Power/Protect/Thermal LED
- Input Clip LED3
- Output Clip LED1,2,3
- LED Colour Legend:
- 1BLUE: <0.5% THD
- 2VIOLET: 1% THD
- 3RED: 10%+ THD
- Power Wire Gauge 8 AWG to 4 AWG
- Power Input Connector Captive C-Clamp
- Speaker Wire Gauge 8 AWG to 18 AWG
- Speaker Output Connector Captive C-Clamp
- Cooling Convection
- Heatsink
- Operating Voltage 9 - 16 VDC
- Recommended Fuse (not included) 50 A
- Average Current Draw (13.8V Music) 23 A
- Max. Current Draw (13.8V Sinewave) 45 A
- Suggested Alternator 75 A
- Dimensions (H x W x D)
- 2.38 x 7.76 x 9.86 (in)
- 6.05 x 19.71 x 25.04 (cm)
- Shipping Weight 9.5 Lbs. (4.3 Kg.)
UK Delivery Options:
- Standard Delivery 2-3 Working Days £4.99
- Courier Next Working Day £9.99
- Courier Saturday £25
International Delivery Options:
Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk
Order Tracking:
Visit the DPD website Tracking page here - You will need your tracking number
Unwanted Goods:
In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.
Manufacturer's warranty:
Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.
For more information Click Here