Rockford Fosgate PM300X1 300 Watt Full-Range Mono Amplifier Marine Amplifier

The PM300X1 is a 300 Watt mono amplifier with high dynamic power using Class-a/b technology and a conformal coated pc board designed for motorsport and marine applications

The PM300X1 is perfect for use as a dedicated subwoofer or center channel amplifier. Regardless if you're driving multiple speakers or just one, the hefty 2-ohm capability will deliver the right amount of PUNCH that you want! Now, thanks to its small chassis design, it will also fit where traditional amplifiers cannot.

• High level input capable with Auto Turn-On circuit
• RCA pass-thru outputs
• Features C.L.E.A.N. Set-up
• Optional remote Punch Level Control (PLC2) ready (w/ input clip indicator)
• 12dB/octave Butterworth crossover
• On-board Punch EQ with +18dB boost @ 45Hz.
• Muted turn on
• Stealth top mounted control panel
• Cast aluminum heatsink
• Short circuit protection
• Over current protection
• Marine grade two part epoxy coating on circuit boards
• Marine grade stainless steel hardware

Specifications:

CEA-2006 Power Rating

• 200W x 1 @ 4Ω
• ≤1.0% THD+N
• Number of Channels: 1

Rated Power (RMS Continuous Power):

• 200 Watts x 1 @ 4-Ohm
• 300 Watts x 1 @ 2-Ohm

Total Power (Sum of Rated Power):

• 300 Watts
• Dynamic Power

(PVC/PowerCube®):

• 260 Watts x 1 @ 4-Ohms 0° Res
• 444 Watts x 1 @ 2-Ohms 0° Res

Bridgeable:

• No

Frequency Response:

• 20Hz to 20kHz +/- 1.0dB

Efficiency (average):

• 74% @ 4-Ohm

Total Harmonic Distortion (THD+Noise):

• 4-Ohm: <1.0%
• 2-Ohm: <1.0%

Crossover Controls:

• High-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
• Low-Pass: 50Hz-250Hz @ 12dB/octave Butterworth
• All-Pass: Yes

Tone Controls:

• Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or
• Punch EQ2 Treble: 0dB to +12.5dB @ 12kHz
• Function depends upon LP/AP/HP switch position

Input Sensitivity:

• 150 mV - 12 V

Signal Input:

• Hi/Low level: 1 RCA pair

Signal Output:

• Low Level: 1 RCA Pair

Power Input Connector:

• Captive C-Clamp

Power Wire Gauge:

• 8 AWG to 4 AWG

Speaker Output Connector:

• Captive C-Clamp

Speaker Wire Gauge:

• 8 AWG to 18 AWG

Heat Sink Type:

• Cast aluminum

Cooling:

• Convection

Remote Controls:

• Optional Punch Level Control (PLC2) Ready

Visual Indicators:

• Power/Protect/Thermal LED
• Input Clip LED
• Output Clip LED

Circuit Topology Class:

• Class-A/B

Operating Voltage:

• 9 - 16 VDC

Recommended Fuse

• (not included): 50 A

Max. Current Draw (13.8V Sinewave):

• 45 A

Average Current Draw (13.8V Music):

• 23 A

Suggested Alternator:

• 75 A

Shipping Weight:

• 9.5 Lbs. (4.30 Kg.)

Dimensions (H x W x D):

• 2.38 x 7.76 x 9.86 (in)
• 6.05 x 19.71 x 25.04 (cm)

UK Delivery Options:

• Standard Delivery 2-3 Working Days £4.99
• Courier Next Working Day £9.99
• Courier Saturday £25

International Delivery Options:

Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk

Order Tracking:

Visit the DPD website Tracking page here - You will need your tracking number

Unwanted Goods:

In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.

Manufacturer's warranty:

Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.

For more information Click Here