JL Audio Evolution C1-690 6 x 9-inch (150 x 230 mm) 2-Way Component Speaker System
Need Help?
C1 woofer drivers benefit from proprietary FEA modeling and JL Audio's expertise in low-frequency driver design. This knowledge is used to create speakers that can play loudly, while maintaining a smooth, dynamic, low distortion sound. At the core of the C1-690 is a proprietary, stamped, steel 6 x 9-inch (150 x 230 mm) oval frame and a DMA-optimized motor system. A mineral-filled, injection-molded polypropylene cone is suspended with a rubber surround on the front, and a carefully engineered flat Conex® spider at the top of the voice coil, to precisely control motion and prevent impact between the voice coil and the back plate. Tinsel leads are carefully routed and attached to the spider to prevent fatigue and buzzing. These are the same kinds of features and materials normally found on much more expensive loudspeakers.
Equipped with a true, edge-driven, 1-inch aluminum dome tweeter, the C1-690 stands further apart from others in its category with superior high-frequency clarity and definition. The tweeter’s design has inherently excellent off-axis response and high-frequency extension. It also benefits from the damping of a silk surround suspension and Ferrofluid in the voice coil gap, along with the superior strength of a neodymium magnet circuit. An in-line, outboard 2nd order high-pass filter, with Advanced Tweeter Protection Circuitry, is included to further enhance smoothness and improve power handling.
When it comes to value, C1 is the real deal!
Sold as a pair. Grilles not included.
General Specifications:
- Continuous Power Handling (RMS) 60 W
- Peak Music Power 225 W
- Recommended Amplifier Power (RMS) 10 - 100 W / Ch.
- System Efficiency 89.0 dB @ 1 W / 1 m
- System Nominal Impedance 4 Ω
- System Frequency Response 39 Hz - 22 KHz ± 3 dB
Woofer Physical Specifications:
- Frame Outer Diameter* (A) 6.38 x 9.33 in / 162 x 237 mm
- Grille Tray Outer Diameter (B) N/A
- Motor Outer Diameter (C) 3.54 in / 90 mm
- Frontal Coaxial Tweeter Protrusion (D) N/A
- Frontal Grille Protrusion (E) N/A
- Mounting Hole Diameter (F) N/A
- Mounting Depth (G) 2.75 in / 70 mm
Tweeter Physical Specifications:
- Flush Mount Fixture Diameter (A1) 1.97 in / 50 mm
- Surface Mount Fixture Diameter (A2) 2.01 in / 51 mm
- Flush Mount Mounting Hole Diameter (B) 1.75 in / 54 mm
- Flush Mount Mounting Depth (C) 0.40 in / 10 mm
- Flush Mount Tweeter Frontal Protrusion (D1) 0.32 in / 8 mm
- Surface Mount Tweeter Frontal Protrusion (D2)0.87 in / 22 mm
Crossover Physical Specifications:
- Depth (D) 1.34 in / 34 mm
- Height (H) 0.90 in / 23 mm
- Width (W) 1.96 in / 50 mm
*Does not take into account mounting tabs
**Frontal grille protrusion measured from mounting surface
UK Delivery Options:
- Standard Delivery 2-3 Working Days £4.99
- Courier Next Working Day £9.99
- Courier Saturday £25
International Delivery Options:
Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk
Order Tracking:
Visit the DPD website Tracking page here - You will need your tracking number
Unwanted Goods:
In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.
Manufacturer's warranty:
Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.
For more information Click Here