JL Audio ACS112LG-TW1 - 12" TW1 Active Subwoofer With Built-in Class D Amp 400W RMS
Need Help?
Amplified Subwoofer System with Single 12TW1-0.25 Subwoofer Driver, Built-In 400W Class D Amplifier, Black Carpet - Sealed Enclosure
In PowerWedge+™ systems, the power is built right into the subwoofer system. Housing a proprietary Class D amplifier, this subwoofer system employs our exclusive DCD™ amplifier technology to extract maximum output from its specially engineered, ultra low-impedance TW1 driver. By combining direct power conversion with an ultra-high current output section, DCD™ amplifiers are free of conventional switching power supplies, enabling them to generate remarkable power with unprecedented efficiency.
Harnessing the performance and insanely small box requirements of the TW1 subwoofer driver, this subwoofer system is designed to deliver amazing sub-bass from an enclosure that is only 6.625 in. (168 mm) deep. Its low-profile enclosure design has been carefully engineered to the optimum sealed enclosure alignment for the 12TW1 driver and has been fine-tuned through extensive real-world listening.
Integration to OEM and aftermarket head units is a snap thanks to a variety of input options and automatic turn-on capability (via signal sensing or DC offset sensing). Also included is a variable frequency low-pass filter (50-200 Hz), along with output polarity control switch. Adding an optional RBC-1 remote level control (sold separately) lets you control subwoofer levels directly from the driver’s seat. A quick-disconnect power connector makes it easy to remove the subwoofer when you need the extra space.
Note: DCD™ amplified systems use very specific components. Never use a DCD™ amplifier or its companion subwoofer(s) with incompatible, non-DCD™ products. Doing so will void the warranty and may cause severe damage.
Finish: Black, high-grade automotive carpet with silver "JL AUDIO Built In USA" embroidery on front baffle. A steel mesh grille is included to protect the subwoofer driver.
Construction: CNC-Cut High-Grade MDF
Amplifier power: Built-in DCD™ Class D amplifier (400 W @ 0.25 Ω)
Nominal Impedance: 0.25 Ω
Enclosure and Subwoofer Made in USA
Specifications
General Specifications
- Continuous Power Handling (RMS) Built-in amplifier 400 W @ 0.25 Ω
- System Nominal Impedance 0.25 Ω
- Input Voltage Range @ RCA Inputs 70 mV - 1.40 V RMS
- Input Voltage Range @ High-Level Inputs 280 mV - 5.4 V RMS
- Recommended Copper Power / Ground Wire Gauge 8 AWG wire
- Fuse Rating 30 A (ATO or ATC)
- Enclosure Type Slot-ported, Low-profile
- Finish Black carpet
- Grille Included Black Steel Mesh
Signal Processing
- Filter Modes Low-Pass only
- Filter Slope (dB/Octave) 12 dB
- Filter Frequency Range 50-200 Hz
- Output Polarity Switch Yes
- Remote Subwoofer Level Control Optional (RBC-1)
Physical Specifications
- External Width (W) 21 in / 533 mm
- External Height (H) 13.5 in / 343 mm
- External Depth (D) 6.625 in / 168 mm
- Net Weight 29.2 lb / 13.24 kg
-
UK Delivery Options:
- Standard Delivery 2-3 Working Days £4.99
- Courier Next Working Day £9.99
- Courier Saturday £25
International Delivery Options:
Some European countries are included - Please email us to confirm we can send to you destination. Sales@CarAudioDirect.co.uk
Order Tracking:
Visit the DPD website Tracking page here - You will need your tracking number
Unwanted Goods:
In accordance with The Consumer Contracts Regulations (2015), you have a 14 working day 'cooling off period' in which you have the right to cancel your purchase and receive a full refund.
Manufacturer's warranty:
Beyond this 14 working day period, you are covered under the manufacturer's warranty which is typically 1 year (Excluding Open Box products). If your product becomes faulty during this period, you should contact our eSupport department, via the website, direct email or phone for a returns number. We will then arrange for your item to be repaired (or replaced, if appropriate with a new product) or provide details of the manufacturers local service centre.
For more information Click Here